Don’t Run Screaming Away! Getting Rid of Mice is Easier Than You Might Think!

When most citizen think of mice, the old, familiar photo of a lady standing on a chair, scared to death, often comes to mind. However, these miniature rodents can prove to be much more than just a nuisance. They carry diseases, can destroy many things in your home, and leave their fecal droppings everywhere. Getting rid of mice isn’t as difficult as you might think, as long as you consider the following.

Get Rid of Their Food

Chairs Kitchen

If your house has a tendency to leave the mess in the kitchen for you to clean up later, then it’s time to make some changes. These pesky creatures will come out of hiding for approximately any crumb or scrap left around. However, they are also lured by many foods stored in your kitchen cupboard. Food such as flour, sugar, pastas, and breads all attract these rodents. Keep these foods in airtight plastic containers in order to lessen the likelihood of providing smorgasbord for these beady-eyed creatures.

Don’t Run Screaming Away! Getting Rid of Mice is Easier Than You Might Think!

Pros and Cons of Poisons

While one of the most productive means of getting rid of mice is with poisons, there are a estimate of drawbacks. It’s not recommended to use poison in a home with young children or with pets. It only takes a very small estimate of this poison to prove fatal to a child or pet. There are other alternatives available that are much less likely to originate these household hazards.

Natural Methods of Getting Rid of Mice

You can find a lot of data on how to get rid of mice online. There are a estimate of natural products available that work quite effectively, but don’t comprise poisons. Some of these products will work and others will not. However, most are normally reasonable or it could be something you already have in your cupboard. A miniature bit of study can go a long way when it comes to collecting the right information.

A Few Final Thoughts

The first time you see a mouse scurry over the floor, you may be too stunned to do much of anything. However, quick activity is needed or you will end up with a houseful. Many times, these vermin can get into the walls of your home, causing all kinds of electrical and insulation problems. You must work at getting rid of the pest from the first sign that one has decided to call your house home. Otherwise, you’ll fast have more than just one!

Don’t Run Screaming Away! Getting Rid of Mice is Easier Than You Might Think!

How to Distress Furniture – Step by Step Guide

For a unique look, many homeowners are mixing distressed furniture with current contemporary styles.

Before you go throwing away your old dining room or bedroom sets, think by refinishing it. Distressed furniture can be very high-priced to buy so why not generate it yourself with a exiguous imagination and some Tlc. This step by step guide will give you some helpful tips that the pros use when distressing furniture.

Chairs Kitchen

1. Sand: Sand down the close on your piece so the primer/paint has something to adhere to. Use medium/fine grit sandpaper for this.

How to Distress Furniture – Step by Step Guide

2. Rough up surface: Take a few tools (hammer, screw driver, chain, etc.) and rough up the outside of the piece. This is left up to your discretion of how distressed you want to make the furniture. The more you rough up the outside the more aged the piece appears.

3.Prime: Use a good quality white primer and give the piece of furniture a thin coat. After the piece has dried, result up with a light sanding.

4. Top coat: Pick a top coat that complements the room. If you want to stay neutral, then go with whites/off whites. Apply two even coats of this top coat. Sometimes, homeowners will invite a crackle close in which the top coat appears as if the paint has dried and is beginning to chip away. For a crackle close read the steps below:

a. result steps 1-3.

b. optional Base coat: Get Creative!! If you do not want the piece to show white crackle from primer coat, then now is the time to be creative. You can apply a separate base coat which will show behind the top coat when the crackle takes effect.

c. Apply crackle glaze where you want the top coat to crackle. Allow to dry according to directions on package. This is ordinarily a clear glaze sold at your local home center.

d. Top Coat: Apply top coat evenly (try not to over brush which may cause paint to drag). This top coat should be a separate shade then the primer/base coat to make the crackle stand out.

e. Continue the result steps below.

5. optional Glaze coat: After the piece has wholly dried, apply a glaze over the entire piece. This step is optional but recommended. This glaze (usually dark brown/grey) when applied, highlights all of the roughed up areas (step 2) and literally brings out the details in the piece. The best way to apply the glaze, is with a brush and then wipe off the excess with a rag. Wipe with even pressure (in one direction).

6. Apply a seal coat: Water based Poly works good for this. Apply 2-3 thin coats of this product according to the manufacturer’s suggestion and do not forget to sand in between coats. This step will safe all of your hard work.

Now step back and enjoy your newly antiqued furniture. You will be amazed at the results and how quick and easy you have changed the look of your room. Take your time & most importantly be creative with this!!

How to Distress Furniture – Step by Step Guide